Why In Wall Fireplace Is Right For You?

In Wall Fireplace – How to Choose the Right Height and Depth for Your Fireplace

An in-wall fireplace gives an elegant and polished appearance without the expense of a mantle. It is among the easiest electric fireplaces to install.

There are a few aspects to think about prior to purchasing an in-wall fireplace. To get the most value from your investment, consider these suggestions:.

Height

It might appear to be a simple question, but determining the height of your fireplace is among the biggest decisions you will make. This is because the height of your fireplace will impact everything from how well it will fit in a room to how easily it can be seen. If your fireplace is to high could make it look unnatural and take away from the beauty of the piece. A fireplace that is too low could be lost within the wall space.

Luckily electric fireplaces are able enough to be positioned at a variety of heights. For instance, the majority of people choose to mount their Metal fireplaces on the eye level from a seated position. This requires a height between 40-42 inches. Some fireplaces are mounted under their TVs, which is an attractive option.

The height of your fireplace depends on a number of factors that include the size and length of the wall you intend to place it on. The larger the space is, the bigger it will be. This could mean you are in a position to fit a bigger fireplace in it. The length of the wall is also important because a wall that is longer will support a larger fireplace.

Another important aspect to consider is how you intend to make use of your fireplace. If you intend to use it only to decorate your home, it is recommended to choose a lower height. If you want to use it to heat your home, you will need to make sure that the fireplace is strong and tall enough to meet the safety standards.

It is crucial to select the appropriate size for your fireplace to ensure that it is in line with your decor and be easy to clean or fill. You can always consult a professional fireplace installer to assist you if you are unsure about the best height to choose. They can suggest the best height for your fireplace based on their knowledge and your home’s design.

Depth

It is essential to know the depth of a fireplace if you plan to install it in a recessed position. If you are going to cut into your wall, ensure that you have enough space to accommodate the interior design of your fireplace (the smoke shelf above the fireplace, the flue that runs through the roof, and the fireplace itself). Also, think about the space you will have for the surround and whether you want a mantle.

Many of the newer electric fireplaces have a depth that is nearly concealed, giving them the appearance of a “built-in” look. The Panorama BI-Deep series is a great example of this kind of wall-mounted electric fireplace. The model is 5.8-inch deep frame that lets viewers to view the flames and ember bed, and not the frame. The media package includes driftwood logs with natural looks, white pebbles or clear glass crystals to add a luster to the embers and reflect the flames.

Gas wall-mounted fireplaces also come in both shallow and deep models. When deciding on the depth of your fireplace, it is important to remember that these fireplaces function as a source of heat that is supplementary and must be properly vented by a knowledgeable professional. The length of the vent pipe, the length of the flue, as well as the distance from the stove to the vent are all elements that should be considered when determining the depth of a fireplace made of gas.

It is crucial to read and carefully follow the instructions provided by the manufacturer before installing your fireplace. A professional installer is recommended in most instances. It is good to have an extra person on hand when installing a gas fireplace.

The addition of an in-wall fireplace space to your home is an excellent way to increase the value of it and create an atmosphere. It can also lower your heating expenses. It’s an excellent option when you aren’t able to fit an old-fashioned fireplace into your home due to space limitations or the location of the chimney.

Surface Mount

Surface mounts are an excellent alternative if you don’t want to or aren’t able to cut into the wall to install an electric fireplace. They also give it a sleek, built-in appearance. Certain models, such as the Allusion line of electric fireplaces, can be mounted partially recessed into walls without compromising the heat output.

To start the installation process, you must determine where you want your fireplace to be installed and mark it with a pencil along the wall where the bracket will be installed. Utilize a stud locater to locate the studs within that area and make sure every mounting bracket is directly in the front of one or more studs for stability. If a stud isn’t in reach or doesn’t work for your fireplace, use anchors for drywall to support the mounting bracket.

Once you’ve marked the location of mounting brackets on the wall, use a power drill to install them and ensure that they are aligned correctly with the studs. If possible, connect each bracket to a stud to ensure strength and stability, however you can also use anchors made of plastic in the event of need. After the mounting brackets are in place, raise your fireplace, then hang it from the wall bracket. Once it’s secure, verify the position of your fireplace to make sure that it’s straight and not crooked in the opening.

Before continuing with the installation, connect your fireplace and check that all the features are functioning correctly – turn on the flame and light up the flames, play around with heat, ember bed lights, etc. Once you’re happy with the results, it’s time to install your floating mantel.

Based on the model of your fireplace, you will either need to connect the wire connection to the appliance connector at the mantel’s bottom, or if it has slots or hooks connected to slots on the mounting brackets. After you’ve completed this then, refer to the owner’s manual for specific instructions on removing the front glass panel and installing it inside the opening.

If you need to adjust the height and width, you should replace the glass front after you have removed the front panel. If your fireplace is equipped with ember bed media, place it over the top of the grate for a more natural appearance. Secure it using the screws included.

Plug-In

Unlike traditional wood-burning fireplaces, electric fireplaces don’t require chimneys or vents. They plug into a standard outlet, providing supplemental heat for rooms up to 400 square feet in size. They also have a variety of flame and heat settings so that you can alter your ambience. Some models feature LED lighting effects that enhance the ember bed and the fire. Certain models have an overhanging grille that conceals the manual controls, but can easily be opened to reveal buttons.

Electric fire places with plug-ins can be installed directly on the wall or recessed to give the appearance of a built-in. These units are typically simpler to set up than a mantel fireplace. Some come with pedestal bases to permit you to put the fireplace on a flat surface, such as buffets or dressers. A remote control, mounting hardware and log set are all included. Electric fireplaces are able to include both heat and flame options which can be removed to create a year-round ambience.

Some models have privacy glass that can be easily adjusted from completely transparent to partially transparent. This option makes these models popular for walls that divide common areas of entertainment like living and dining spaces. They can also be utilized in bedrooms where adding a new fireplace is a cost-effective way to cool an area without compromising privacy.

Plug-in electric fire places do not require a hardwire however they must be plugged into an area that is able to support their weight. Some models come with a kit that comes with a pre-wired cord as well as a specially designed bracket to make the installation process simpler. This kit can be used for concrete or drywall installation.

If you decide to install your wall-mounted electric fireplace make sure it is located near an outlet. Plug-in electric fire places can be connected to outlets that are on the same circuit as the electric fireplace, or into a designated outlet. It is best to choose a dedicated circuit so that nothing else in the home will be operating at the same voltage, and possibly trip your breakers.