See What Ghost Immobiliser Problems Tricks The Celebs Are Using

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser can safeguard your valuable property from theft. This system is discreet & does not require any additional key fobs in order to operate.

The device makes use of buttons on your vehicle (steering wheels doors, door panels, and the centre console) to create a unique pin code sequence that can be modified up to 20 times. This will allow your vehicle to start.

Simple process to change the PIN code

Many owners are upgrading their security because of the rise in vehicle theft. There are a variety of aftermarket security devices that range from tracking systems to alarms and immobilisers. However there are a few that are equally effective in protecting your car. A tracking system may aid in finding your car if it is stolen, but it will not prevent the crime. An immobiliser, on the other hand, does exactly what it says on the tin: it disables the engine of your car so that it cannot be started. The Autowatch Ghost is one of the most advanced options available, making it almost impossible for thieves to steal your vehicle.

The ghost immobiliser cost device uses the buttons on your car to create a unique sequence which must be entered to allow the engine to begin. This can be done using the heater, window or indicator stalk buttons. Additionally it is possible to use a mobile app which can act as an emergency PIN code override and allows the driver to operate the car without the button sequence. This is an excellent option if you want to give your car to valet parking or servicing. The immobiliser will stay in operation.

The Ghost is a truly unique and ingenious device that works in conjunction with buttons in your vehicle instead of being a separate device. This means that it is not just a highly effective security measure against theft from your vehicle but it can also be transferred over to any future cars you may own, making it more investment-wise than the traditional lock on your steering wheel.

Weatherproof small device

The Autowatch ghost immobiliser is an advanced security system that protects your vehicle from key cloning, hacking and ECU swapping. It is a small, weatherproof device that communicates with the ECU of your vehicle directly via the CAN bus, causing it to shut down the motor. It can be plugged into the vehicle without the need for additional wiring and has been thoroughly tested to ensure it works with all vehicles. It is also resistant against jamming devices, which are a common technique used by thieves to get around immobilisers.

The advantage of using CAN data is that it operates silently compared to traditional systems. It isn’t detected by sophisticated RF scanning and code-grabbing technologies as well as recognized by conventional diagnostic tools. The Autowatch ghost doesn’t emit LED indications and uses the buttons in your vehicle, such as the steering wheel or centre console panels to create a unique, changeable disarm sequence. The sequence can be extended 20 or more presses to provide additional security. The iPhone app only allows one connection, and comes with an individual pairing code for the Ghost. All communication between the two devices is encrypted.

The Ghost stops car thieves from adding an ignition key replacement or replacing the ECU to bypass the immobiliser. It will only allow the engine to run if the correct PIN code is entered. It is also possible to put it in valet/service mode to allow for temporary operation (with specified parameters, such as a 30mph speed limit) to allow you to transfer your vehicle to a valet service or to be serviced without needing to enter a pin code.

Every vehicle is tested

The Autowatch Ghost is the first aftermarket CAN bus immobiliser that is able to be connected to your vehicle’s existing wiring and connects to your engine control unit (ECU). The device detects signals to prevent your car from starting normally until you enter a custom code. The system can be turned on and off by using your smartphone’s app without the need for wires.

Standard factory immobilisers for vehicles function by using an electronic transponder in the key that sends a signal to the ECU. If the correct code is transmitted the car will begin, but if a transponder is replaced by one from a different vehicle, the immobiliser cannot recognize it. This makes it possible for the vehicle to be stolen and then started. The Ghost immobiliser was created by an South African company at the forefront of vehicle security systems technology. It protects you from hacking or key cloning, and even key theft. The only way that a burglar could take your vehicle is physically towing it away and even then they wouldn’t be allowed to drive it.

Ghost uses buttons on your vehicle, including the indicator stalk, steering wheel, and door Ghost Immobiliser Problems panels, to create unique PIN codes that must be entered to use your vehicle. This is performed without the need for extra hardware such as key fobs and can be up to 20 presses long. It is also undetectable by devices for diagnosis and transmits radio frequency signals, which means thieves cannot use sophisticated RF scanners or code-grabbing technologies to identify that the system has been set up.

Ghost is harder to remove than car alarms that require disarming using several buttons. This makes it an excellent supplement to a GPS tracker which helps locate your car after it has been taken.

Emergency PIN code override

You don’t have to look very far on social media for stories or videos of vehicles that have been stolen using the latest technology tools. This includes key-cloning and hacking devices that allow you to start your car without the original keys.

The Ghost immobiliser was designed to combat this and provide you with an additional layer of security in order to keep your vehicle from being targeted by thieves. It creates a unique pin code when pressing the buttons on your steering wheel, door panel and on the centre console. This unique PIN must be entered together with your original key fob in order to prevent the vehicle from starting. The unique override pin can be found on the black card that you will receive after installation and is easy to remember since there are no LED indications.

The device is hidden in the vehicle’s wires and doesn’t emit any radio signals, which means it isn’t able to be detected by modern criminals using diagnostic software that can recognise what type of security system you have installed. This makes it an excellent alternative to a tracking device.

Contrary to most security systems that have an engine relay bay, CANBUS Immobilisers communicate with the car’s ECU and BCM via CAN data bus (brand dependant). This allows them to shut down a vehicle completely, by sending a digital block to the ECU and engine.

It is also possible to connect a separate analog immobiliser, alarm, or tracker to these systems but this must be specified before installing the device. They are also fully service/valet mode compatible and a great alternative to a tracker when you are taking your car in for repairs to an electrical issue at the dealer.

Service/Valet Mode

In recent years there has been an increase in vehicles being stolen from owners without keys. It’s easier than ever to steal your pride & joy due to the availability of key cloning tools & door lock picks. We’ve developed the Autowatch ghost immobiliser problems Immobiliser to combat this. It blocks your vehicle from being driven even if your keys have been cloned.

It communicates directly with your car’s ECU (Engine Control Unit), via the data loop called CAN. It’s completely silent as it does not use radio frequencies or key fobs. This means that it can’t be detected by diagnostics or other car hacking devices. It also prevents the user from using the new ECU or key to bypass the system because only the PIN number allows the engine to start.

The device is hidden inside your car, using buttons on the steering wheel, centre console & door panels. A unique and changeable PIN code sequence up to 20 digits needs to be entered before you are able to start your vehicle.

This is the first aftermarket immobiliser for CAN bus to be created that will stop your car from being moved away or even started in the event that a PIN code hasn’t been entered before. If you’re driving away with the device in motion the indicator will flash on your dashboard which will flash continuously for around 300m. Entering your PIN code will turn off the anti-hijack. Your car will continue to run as normal. If you do not enter your PIN code at this time the indication will continue to flash and require a new PIN code every attempt to start your vehicle.