Restoring a Destroyed iPhone 11 Pro Max An Affordable Solution

Have you ever come across a completely shattered iPhone and wondered if it could be brought back to life? Well, that’s exactly what we did in this exciting restoration project. We managed to breathe new life into a destroyed iPhone 11 Pro Max that we purchased for just 100 Australian dollars (around 75 USD). This model, which was released only a year ago, is still a high-demand item. However, the one we got had been through a lot – the back glass was obliterated, the frame was bent, and the screen was popping out. Let’s dive into the step-by-step process of how we turned this wreck into a fully functional phone, and we’ll also share some tips from Gadget Kings PRS, your go-to phone repair shop.

The Initial Assessment

Upon receiving the iPhone, the first thing we noticed was the severe damage to the back glass and the bent frame. According to the previous owner, the phone got wedged into a bed frame, and someone jumped on the bed, causing this damage. Despite the visible damage, we decided to check if the phone could still charge. Plugging it in showed no display response, but using an amp meter, we verified it was drawing about an amp of current, indicating it was charging.

Ordering Parts and Initial Testing

Before diving into the repair, we ordered a new rear housing and frame, along with a new display. We needed to transfer all the internal components of the phone into the new housing. To start, we removed the two pentalobe screws at the bottom of the iPhone. Given the hole in the phone’s side, inserting a plastic pick to lift the display was easier than usual. We carefully cut through the adhesive and unclipped the display from the sides and top to lift it up.

After disconnecting the battery and display connections, we immediately connected a replacement display to test the phone. Upon charging, the phone booted up to the lock screen, confirming it was working. This gave us the green light to proceed with the restoration.

Transferring Components to the New Housing

With the display confirmed functional, we disconnected the battery and display again and removed the rear cameras, face ID module, and the logic board. The logic board looked perfect despite the phone’s bent state, with no apparent issues. We then removed the charging port, speaker, and Taptic Engine. Apple uses various screw types, which made this part tedious, but we managed with the right tools.

Next, we tackled the battery, which was held in place by adhesive strips. Carefully removing these strips allowed us to pull the battery out without damaging it. Following this, we removed all smaller components, alupen touch-sensitive including the antenna assembly, power button, rear microphone, and flash. This meticulous process involved using isopropyl alcohol to lift adhesive parts safely.

Reassembling in the New Housing

With the old housing empty, we turned our attention to the new housing. The new housing came with buttons and clips pre-installed, but we transferred some components like the little springs on the buttons from the old housing. We reinstalled the wireless charging coil with new adhesive and then began reassembling all the components we had removed.

Reinstalling the logic board and reconnecting the various cables, we ensured everything was in place. After securing the rear cameras and Face ID sensor, we connected the display and battery for another test. The phone booted up successfully again, confirming our progress was on track.

Final Assembly and Testing

Before sealing the phone, we used a JC programmer to transfer the old display’s serial numbers to the new display, ensuring Apple’s True Tone feature would work. We then carefully transferred the earpiece flex cable and other sensors from the old display to the new one.

With everything in place, we applied a new water-resistant seal between the frame and the display. After reconnecting the display and battery cables, we fastened the brackets and screws, ensuring the phone was securely reassembled. We finished by installing a tempered glass screen protector and restoring the phone to factory settings.

Results and Cost Analysis

The restoration was a success! The once-destroyed iPhone 11 Pro Max was now fully functional and looked as good as new. The total cost for the phone and parts was about 412 Australian dollars (around 313 USD). Considering these phones sell for around 950 to 1,100 AUD on eBay, we saved at least 538 dollars.

Why Choose Gadget Kings PRS?

If you’re in need of phone repairs, whether for a minor fix or a major restoration like this one, Gadget Kings PRS is your best choice. Located at [Your Address], Gadget Kings PRS offers expert repair services with high-quality parts and skilled technicians. We ensure your device gets the best care and attention it needs. Visit Gadget Kings PRS for all your phone repair needs and experience top-notch service that guarantees satisfaction.

This restoration project not only brought back a high-end iPhone from the brink of death but also demonstrated the cost-effectiveness and satisfaction of doing such repairs. For more exciting restoration projects and tips, don’t forget to subscribe to our channel and check out our playlist of restoration videos. If you have any questions or need tools for your repairs, visit our website for more information. Thank you for reading, and happy repairing!