11 Strategies To Completely Block Your Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are durable, long-lasting and easy to maintain. They don’t get rotten or rusty like timber and aluminum.

It is important to clean and oil UPVC doors and windows regularly. This will prevent unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it could cause a large amount of damage to your home, making it extremely dangerous and possibly fatal. It is important to take the time to ensure that you’re doing everything you can to keep your windows in good shape.

Single-pane windows are fairly simple to replace and typically fit into frames that were previously in use very easily. If you have double-paned windows that are joined by internal beading, it is harder to remove and replace the old panes. In this situation, you will need to locate some plastic spacers that help the new pane to fit correctly into the window frame.

If you are going to try to remove the window panes by yourself it is important to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. It is also an excellent idea to lay down a dropcloth before you start working on the glass so that any fragments of glass fall on the fabric rather than on the floor where they can be trampled upon and cause further damage.

It’s a great idea to seal the gap after the glass has been removed. This will prevent drafts and water from getting into your home until a professional comes out to repair the window. It also acts as a barrier, preventing any intruders to gain access into your home. If the gap is particularly large, you might want to consider using the security door with an integrated window, as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber sash windows. In time, they could be affected by a variety of issues such as sagging. A window repairs that is sagging can cause problems with light, draughts, and even security. It’s important to take action as soon as you discover that your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window that is sliding. To accomplish this, you’ll need to open the window to access the frame. Then, remove both the hinges on the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after having relocated your hinges. If you’re happy with the fit, tighten the screws until they remain in position.

If you aren’t able to move the hinges you may need to replace the seal. As time passes, rubber seals lose their elasticity and become dry which causes them to lose tightness. If this happens, it’s important to replace the seal as fast as possible so that your uPVC windows are watertight and secure from draughts.

uPVC handles may also become loose. Often, this is caused by screws that have come loose over time. However, it can occur because the handle mechanism has been worn out. It’s relatively easy to repair a loose uPVC handle. First, you’ll need to close the window and perform an experiment fitting. The joint at the corner of the sash must align with the joint on the casing. If it doesn’t you can use a screwdriver to loosen up the handle. Then turn the mechanism into position.

3. Water Leaks

It is essential to take action if you get up each morning to find a smoky wall and wet floors. The leaks of water from windows do can not only cause destruction of your home’s structure but also hamper your efforts to control the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or is missing.

This is a relatively easy fix that can be done by any DIY expert. Depending on how severe the problem is, the old caulking may have to be removed. It is essential to remember that when it is about uPVC window repairs you should avoid the temptation to “over-caulk and then make the area harder to clean and can reduce the efficiency of your energy.

Make sure that the drainage holes do not have debris in them and that the sill pan has been properly angled to drain away from the window. In more serious situations, you might have to consider replacing the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can quickly spread throughout the home.

It is also important to note that if the leakage is coming from between the glass of your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or it opens in an ease. They can be easily repaired by any skilled DIYer and are usually completed in just a few minutes.

Like any mechanical component hinges are prone to wear out over time. It’s easy to change the hinges on a window, but it’s easier if someone else helps you to hold the frame.

It is also worth checking that the uPVC hinges are being opened and closed in the right direction. This can be done by looking for the arrow on each hinge, this shows which way the window should open.

Window hinges that aren’t working properly can be caused by incorrectly opening the window in a particular manner or because of improper installation in the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be more than happy to give you suggestions.

It is also essential to grease the hinges on a regular basis. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window to operate and close more smoothly. It also helps prevent corrosion and reduce the risk of sticking. This must be done at a minimum every year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges, also because of wear and tear, may become displaced, which will cause a gap to form between the sash and the frame. These can be easily repaired by giving them a good clean, but when they’re beyond repair, it could be necessary to get them realigned or replaced. The interlock may also become misaligned. This happens on the hinge side and might require to be cleaned. In some instances it is possible to replace these.

The next common reason for draughts are the window seals. They can become worn down or damaged over time, and will allow air to escape through the gaps. Installing high-quality weatherstripping will help to prevent draughts. Another option is to replace the upvc window with low-emissivity glass. this will help to regulate indoor temperatures, and also reduce draughts.

One of the most effective ways to cut down on draughts is by using an draught excluder. These are typically fabric tubes which are filled with a kind of filler. They can be placed on the top of your windowsill. They can keep your home warm by blocking out cold air.

With a bit of regular maintenance and repair your windows made of upvc will continue to provide excellent security and insulation for your home. However, it is important to realize that all windows have a lifespan and they may reach an point at which it is more economical to replace them than repair them. So, if you are having issues with your upvc windows, it is always best to seek professional assistance immediately.