15 Reasons Not To Be Ignoring Double Glazed Window Repair

Double Glazed Window Repair

Double glazing is an energy efficient investment that prevents heat loss in the winter and helps to keep your home cooler during the summer. Double glazing windows repaired as needed is a great method to ensure they are operating properly.

Over time condensation and misting may impact your double glazing Eltham-glazed windows. This can cause your double glazed windows to be difficult to open or close.

Broken Panes

A ball that is rogue or a flying stone from your lawnmowers or an intense storm could shatter your double pane windows which can expose your home to the elements. Although a cracked glass window is difficult to repair however, it does not need to be replaced. In fact, the insulated glass between the two panes is still in good shape and you can fix your double-pane window with a little DIY effort.

First, you’ll need to remove any broken glass from the frame. Be careful to prevent glass shards from falling to the floor or falling from the frame. Make sure to wear a pair of work gloves to protect your hands and a cloth to protect the area surrounding the broken glass to avoid further damage or breaks. After you have removed the broken glass clean the frame of the window thoroughly to get rid of any sealant or debris. It is important to sand rough areas of the frame to create an even surface for your new glazing.

Once the frame is cleaned then you can apply a fresh layer of glazing to the area where the damaged pane was removed. This is the best method to keep your window secure and sealed and save you money by preventing drafts and water from entering your home. The next step is to choose the right glazing material. There are a variety of options including clear tape which is more durable than regular tape and helps prevent further cracking of your window or glazing film that is similar to clear plastic wrapping. This option has the advantage that it can be painted to match the frame of your window and can also shield your windows from snow and ice.

Whatever material you choose regardless of the material you choose, it is essential to press glazier’s points into the seam where the putty meets the frame. These will hold the new glass in place and help it to adhere to the frame. Hardware stores sell glazier’s point ropes, which you can roll out onto the frame rabbets.

Condensation

Double glazing can be susceptible to condensation issues. If you experience this problem it is best to contact the company that installed the window. Many companies provide warranties and guarantees that provide coverage for these issues. Fogging and condensation between panes of glass is a clear indication that the seals between your windows are damaged and can only be fixed by a professional who will repair both panes.

This procedure is a bit difficult and requires the use of specific tools to remove the old pane and then install the new one, however it can be accomplished by an expert who will supply the necessary equipment. Utilizing these tools could be risky, so it is always recommended to leave this kind of work to an expert.

If you do decide to undertake this yourself, ensure you wear gloves and safety glasses to protect yourself from any broken glass pieces that could fly off during the process. It is also crucial to carefully remove all putty and metal glazing points from the grooves where the new window will be. Wire-brushing the frame or vacuuming a damp cloth are also recommended. After the frame has dried you’ll have to purchase a replacement piece of glass that is 1/8″ shorter in both directions than your existing window. Test-fit the glass into the grooves.

Depending on your frames depending on your frames, you’ll need to apply a layer of silicone caulk to the grooves to ensure that your new pane is secured in the right place. After the silicone caulk is dried you can smooth it out and make any adjustments. The wood molding will then be put back in place.

Double-glazed windows can be difficult to open or close in the event of extreme weather. Extreme temperatures can cause frames to shrink or expand and cause them to sag or stick. If this is the problem you could try wiping the frames down with water and lubricating the joints. However, it may be a good idea to call the company that installed your windows for assistance.

Misted

If moisture is trapped between the glass panes it can cause misty double glazing. Double glazing is made up of two panes which are separated by a gap filled with argon for greater thermal efficiency. This creates a airtight seal that keeps warm air inside and cold air outside.

The seal may fail over time, and water can accumulate between the panes of glass, causing them misty. This happens because the sun heats the gap between window panes, which causes water to vapourize.

This is a natural occurrence however, if it happens between the panes of the window it could cause problems because it won’t be able to regulate the temperature in the room. Instead the temperature outside the window will influence the temperature indoors. If you notice that your double-glazed windows are turning misty, call in the experts at Northfield Glass to investigate.

We can replace the individual blow-sealed unit without having to replace the entire window which is less disruptive than a total replacement. Our misty glass repair consists of removing and cleaning the glass unit before replacing it with a new one. This will create a watertight seal again.

Some companies in the industry claim to inject chemicals through holes drilled into windows with mist to remove the condensation and fog. We do not suggest this method. This method isn’t just unattractive, but could also damage the toughened glass leaving you with a window that isn’t functioning properly.

If you don’t take care to fix the issue quickly it could result in mold, which could not only damage the window, but risk health issues for your family members. Moisture in the window can cause other problems within your home, such as damp or rot. In certain situations, it may be necessary to replace the entire window.

Blown or Failed

Double-glazed windows are comprised of two panes of glass with an inert or air between them. This increases their thermal efficiency by keeping heat in and cold out. Over time the gas will be depressurized and cause a variety of problems.

Condensation in between the panes is one of the most common. It’s not an indication of a failure in the window however it could be a sign that you should replace the windows. Condensation may be an indication that your double glazing has broken in which case it’s time to get it replaced completely.

It is also important to look for draughts that are coming from the double-glazed windows. This could be because of an unsound seal, a broken handle, or a broken lock. A draught can be quite noticeable and will lead to higher heating bills, so it is important to get it fixed sooner rather than later. Check the seals around the window frame by feeling the cold air.

There will also be water beads on the outside of windows when your window seals aren’t working. This is a good indicator that you will need to replace the seals on your double-glazed windows.

The frames of your windows are designed to move slightly in order to do in order to keep the glass sheets in their place. However, with time, this special packaging material may be compressed and crack the crucial seal. This allows air to move between the panes, decreasing the energy efficiency of your window.

A blown seal is a clear sign that your double glazing is damaged and should be repaired immediately. A damaged seal will stop your double glazing repair Folketone glazing from performing its primary job of keeping cold out and warm in. In addition, a blown seal can let moisture in, which can result in mold and other unpleasant conditions. Contact a double glazing expert as soon you notice a blowing window seal. They can replace the entire unit.