15 Funny People Working Secretly In Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they don’t corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will save you from costly repairs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home, and could even be fatal. It is crucial to take the time to make sure that you are doing everything you can to ensure that your windows are in good repair.

For single pane windows it is relatively easy to replace them, and the replacement will usually fit inside the frame that was previously installed easily. If you have double-paned windows which are joined by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this instance you’ll need source some plastic spacers that assist the new pane to fit properly into the window repairs Margate frame.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass by yourself. You should also lay down a dropcloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor, where they could be trampled under.

It’s a great idea to tape the gap once the glass has been removed. This will stop drafts and water from getting into your home until a professional arrives to repair the window. This also serves as an obstruction to prevent intruders from making their way into your home. If the gap is particularly large, you might want to consider using the security door with an integrated window as it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. However, over time they are susceptible to a range of issues like sagging. A window that isn’t properly aligned can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to sag it’s crucial to act fast to stop the issue from getting worse.

To repair a window that is sagging, you can try to reposition the hinges. First, you’ll need to unblock the windows so you can reach the frame. After that, using a screwdriver, you can unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after having repositioned your hinges. If you’re satisfied with the fit of your window, you can tighten screws to hold them in place.

If you are unable to reposition the hinges, you may need to replace the seal. Over time rubber seals can lose their elasticity and dry out, which causes them to lose tightness. If this happens, it’s crucial to replace the seal as soon as you can to ensure that your uPVC windows remain watertight and draught-proof.

uPVC handles may also become loose. The majority of the time it is due to screws that have become loose over time. However, it could occur because the handle mechanism has been worn out. It’s a good thing that it’s simple to fix the loose uPVC window handle yourself. You’ll first need to close the window and do a test fitting. The joint at the corners of the sash should align with the joint on the casing. If it isn’t then you can use a screwdriver or a wrench to loosen the handle and then return the mechanism to its original position.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home, and hinder your ability to control the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the issue is, old caulking may need to be removed. When it comes to uPVC repair, you must avoid over-caulking. This will only make your window harder to clean and decrease its energy efficiency.

Verify that the drainage holes do not have debris in them and ensure that the sill pan has been angled correctly to drain away from the window. In more serious instances, you might need to consider replacing the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. The is a fungus that thrives in damp conditions and is able to quickly spread throughout the home.

It is also important to remember that if the leakage is coming from between the glass of your double glazing repair Aylesbury-glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sliding. Again this can easily be corrected by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open with ease it could be hinges at the fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that use hinges and like any mechanical part they are susceptible to wear and tear over time. It’s easy to change the hinges on a window but it’s much easier if someone helps you hold the frame.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. This can be done by looking for the arrows on each hinge. This indicates the direction in which the window should open.

The problem can be caused by opening the window incorrectly or due to a poor installation at the factory. Sending us photos via our website is often enough to resolve the problem. We are happy to offer suggestions.

It is also crucial to grease the hinges on a regular basis. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. The ideal time to perform this every year. WD40 or other solvent-based oils should not be used as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different things. The hinges, also because of wear and tear, may become displaced, which will cause an opening to appear between the sash and the frame. If they are beyond repair, it may be required to realign them. The interlock, which is located on the hinge side of the window and can be misaligned. Again, it may be feasible to give them a thorough clean, however in some instances it could be necessary to have these replaced.

These seals can wear down or be damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help control indoor temperatures and lessen draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler, which can be hung over your window sill. They can help stop cold air from entering and keep your home warm and cozy!

With a little regular maintenance and repairs windows made of upvc will continue to provide an excellent level of security and insulation for your home. It is important to remember that all windows will eventually become worn out, and it is more cost-effective to simply replace them rather than repair them. So, if you are having issues with your upvc windows, it is always recommended to seek help from a professional as soon as you can.